Symptom
• The stereo reception
Projection TV cannot
setting is inappropriate.
receive stereo
broadcast signal.
• The sound of the sub
picture is selected
when TWIN pictures
are displayed.
• The connection is
Stereo broadcast
loose or the cable is
sound switches on
damaged.
and off or is
distorted.
• The antenna direction
or
needs adjustment.
The sound switches
between stereo and
• The broadcast signal
monaural
has a transmission
frequently.
problem.
• The channel carries
"100" appears at
no Teletext broadcast.
the top of the
screen after
approximately 10
seconds and there is
no Teletext display.
• Connection is loose
Teletext display is
or the cable is
incomplete
damaged.
(snowy picture or
double images).
• The antenna direction
is inappropriate.
• Signal transmission is
too low.
Lines moving across
• There is interference
the TV screen.
from external
sources, e.g., heavy
machineries, nearby
broadcast station.
Possible cause
• Press A/B until "Auto" appears on
• Press
• Check the antenna cable and
• Adjust the antenna direction. Contact
• Press A/B until a better sound is
• Check the antenna cable and connection
• Adjust the antenna direction. Contact a
• Try using a booster.
• Use the fine tuning ("Fine") function.
• Use the fine tuning ("Fine") function.
Solutions
the screen.
or
.
connection on the projection TV, VCR
and on the wall.
a Sony dealer for advice.
heard.
—
on the projection TV, VCR, and at the wall.
Sony dealer for advice.
Page
28
22
7
–
27
29
7
–
–
50
50
continued
Additional Information
59