Sony WEGA KP-FX432 Mode D'emploi page 23

Selecting a TV program using PAP (Picture And
Picture)
You can select your desired TV program directly from the right picture by using
(TWIN PROG +/–).
1
Move up or down
(TWIN PROG +/–).
The two pictures of the
same channel appear on the
screen (PAP).
2
Move up or down
(TWIN PROG +/–) until the
desired program appears
on the right screen.
3
Press to display the
right picture in full screen.
To change the left picture channel
Press PROG +/– or the number buttons.
To return to the normal screen from the PAP mode
Press
The left picture is displayed in full screen.
Notes
• You cannot change the picture size or swap the two pictures in the PAP
• The PAP feature is not available for HD (high-definition) and progressive
.
mode. (You can swap the sounds of the two pictures.)
signals. If you change the left main picture to an HD or progressive signal,
a message appears and the PAP feature is cancelled. The selected HD or
progressive picture will be displayed in full screen.
10
10
10
8
8
Advanced Operations
23