Table Des Matières; Safety - Sievert 456001 Mode D'emploi

PLEASE READ OPERATORS MANUAL CAREFULLY BEFORE USE AND
KEEP FOR FURTHER REFERENCE.
WARNING!
• ONLY FOR OUTDOORS USE.
• MAY ONLY BE USED BY TRAINED PERSONAL.
• IMPROPER USE OF THIS WELDING MACHINE COULD CAUSE FIRE AND/OR AN EXPLOSION
HAZARD.
• TOUCHING THE NOZZLE OR COMBUSTION CHAMBER DURING OR AFTER OPERATION COULD
CAUSE BURNS.
• TO PROVIDE CONTINUED PROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO
PROPERLY GROUNDED OUTLETS ONLY.
• TO REDUCE THE RISK OF ELECTRIC SHOCK, KEEP EXTENSION CORD CONNECTIONS DRY
AND OF THE GROUND.
• NEVER LIFT OR PULL THE MACHINE IN THE ELECTRIC CORD OR GAS/AIR HOSE.
• MAKE SURE THAT THE WELDING MACHINE IS DISCONNECTED FROM THE GAS AND POWER
SUPPLY, BEFORE MAKING ANY KIND OF MAINTENANCE OR SERVICE WORK.
• STORE PRODUCT INDOORS WHEN NOT IN USE.
• DO NOT CLEAN WELDING MACHINE WITH A WATER SPRAY OR THE LIKE.
• ALWAYS ALLOW THE BURNER TO COOL DOWN BEFORE DISCONNECTING THE MAINS.
SAFETY................................................... 2
GENERAL INFORMATION..................... 3
TECHNICAL SPECIFICATION................ 3
SET-UP OF MACHINE............................ 4
OPERATION............................................ 5
!

SAFETY

TABLE OF CONTENTS
GB
MAINTENANCE & SERVICE.................... 6
REPAIR...................................................... 7
ADJUSTMENT OF WELDING NOZZLE... 8
TROUBLE SHOOTING GUIDE................. 8
SPARE PARTS.......................................... 9
- 2 -
!