Sony HT-ST5000 Manuel D'instructions page 73

Transmission range (A2DP)
20 Hz - 40,000 Hz (LDAC sampling
frequency 96 kHz with 990 kbps
transmission)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
5)
Abbreviation for Advanced Audio
Coding
Front L/Front R speaker block section
Speaker system
2-way coaxial speaker system,
Acoustic suspension
Speaker
Woofer: 65 mm (2 5/8 in.) cone type,
Magnetic fluid speaker
Tweeter: 14 mm (9/16 in.) soft dome
type
Center speaker block section
Speaker system
Center: 2-way coaxial speaker system,
Acoustic suspension
Satellite: Full range speaker system,
Acoustic suspension
Speaker (5 speakers)
Center woofer: 65 mm (2 5/8 in.) cone
type, Magnetic fluid speaker
Tweeter: 14 mm (9/16 in.) soft dome
type
Satellite: 65 mm (2 5/8 in.) cone type,
Magnetic fluid speaker
Top speaker block section
Speaker system
Full range speaker system, Acoustic
suspension
Speaker
65 mm (2 5/8 in.) cone type, Magnetic
fluid speaker
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 90 W
For details about the power
consumption during standby mode,
see "Power Consumption by the
Setting Value for Each Standby
Mode" (page 75).
Dimensions* (approx.) (w/h/d)
1,180 mm × 80 mm × 142 mm (46 1/2 in
× 3 1/4 in × 5 5/8 in) (without grille
frame)
1,180 mm × 80 mm × 145 mm (46 1/2 in
× 3 1/4 in × 5 3/4 in) (with grille frame)
*Not including projection portion
Mass (approx.)
8.3 kg (18 lb 4 4/5 oz) (without grille
frame)
8.8 kg (19 lb 6 2/5 oz) (with grille
frame)
Compatible iPhone/iPod models
The compatible iPhone/iPod models are as
follows. Update your iPhone/iPod with the
latest software before using with the
system.
Made for:
iPhone 7/iPhone 7 Plus/iPhone SE/iPhone
6s/iPhone 6s Plus/iPhone 6/iPhone 6
Plus/iPhone 5s/iPhone 5c/iPhone 5/
iPhone 4s
iPod touch (6th generation)/iPod touch
(5th generation)
Subwoofer (SA-WST5000)
POWER OUTPUT (reference)
200 W (at 2 ohms, 100 Hz)
Speaker system
Subwoofer speaker system, Passive
radiator type
Speaker
180 mm (7 1/8 in.) cone type
200 mm (7 7/8 in.) × 300 mm (11 7/8
in.) cone type, Passive radiator
Power requirements
120 V AC, 60 Hz
Power consumption
On: 30 W
Standby mode: 0.5 W or less
73
US