Sony HT-ST5000 Manuel D'instructions page 25

Mounting the Main Unit on a
Wall
1
Prepare screws (not supplied) that
are suitable for the wall mount
holes on the rear of the main unit.
More than 30 mm (1 3/16 in)
4.6 mm
(3/16 in)
10 mm
(13/32 in)
Hole on the rear of the main unit
2
Stick WALL MOUNT TEMPLATE
(supplied) on a wall.
Center of the TV
Adhesive tape,
etc.
1
Align TV CENTER LINE () of
WALL MOUNT TEMPLATE with the
center line of your TV.
2
Decide on the height of WALL
MOUNT TEMPLATE by referring to
"About the Installation Location
of the Main Unit" (page 24), then
stick the WALL MOUNT
TEMPLATE on a wall by using a
commercially available adhesive
tape, etc.
3
4 mm (3/16 in)
4
5
6
WALL MOUNT
TEMPLATE
Mark the screw positions
described as bellow on SCREW
LINE () of WALL MOUNT
TEMPLATE.
Measure the distance described
below with a scale, then mark using
a pencil, etc.
422 mm
(16 5/8 in)
Screw position
Fasten the screws into the mark.
11 mm to
12 mm
(approx.
7/16 in)
Remove WALL MOUNT TEMPLATE.
Hang the main unit on the screws.
Align the holes of the rear of the
main unit with the screws, then
hang the main unit on the two
screws.
422 mm
(16 5/8 in)
25
US