Main Components - SOLAC CT8640 Mode D'emploi

• Do not use your bed warmer if the power cord is damaged or the appliance
is faulty. Take it to an Authorized Service Centre to have it repaired or re-
placed, as proper tools are required.
• If you decide not to use the bed warmer again, it is best to put it out of
service. To do so, unplug the appliance and cut the power cable. In addition,
it is best to disable the parts of the appliance that could be dangerous,
especially for children, as they might use it improperly during play.
• The bed warmer needs to be placed between the mattress and the bottom
sheet. The rest should be made as usual.
• DO NOT FOLD OVER the top part of the bed warmer or tuck in any wired parts.
• Do not use in an adjustable bed, or if an adjustable bed is used, make sure
that the blanket or cable cannot become trapped or entangled.
• Electrodomésticos Solac, S.A. hereby declines responsibility for injuries or
damage that could be caused to persons, animals or property due to the
failure to heed these warnings.

MAIN COMPONENTS

1.- Bed warmer
2.- Power cord
3.- Control
3.1 ON/OFF switch
3.2. Temperature
3.3. Temperature position
3.4. Countdown on the timer
3.5. Time selected before switching off automatically
3.6. Temperature button
3.7. Timer button
3.8. Selection increase button
3.9. Selection reduction button
USING THE BED WARMER
• Connect the power cord (2) first to the product and then connect it to the
mains.
• Turn the switch on the control (3.1) to the ON position.
• The selection that appears on the screen automatically shows the minimum
temperature position 1, together with 6 hours of operation before the ap-
pliance switches off automatically.
10
Calientacamas CT8640-8645 10 4/1/07, 13:45:20