Cleaning And Maintenance - SOLAC CT8640 Mode D'emploi

• To switch the bed warmer off, select the OFF position on the control (4.1).
Unplug the appliance.

CLEANING AND MAINTENANCE

• You can wash the bed warmer in a washing machine using a delicate wash
programme (maximum temperature of 30°C).
• To wash the bed warmer, ALWAYS unplug the power cord (2); it must never
come into contact with water.
• It is advisable to wash the bed warmer only if it becomes dirty or dusty. If
you wash it too often the product can wear out very quickly.
TO WASH THE PILLOW BY HAND,
FOLLOW THESE INSTRUCTIONS:
• Use neutral soap in warm water (maximum temperature: 30ºC). Soak the bed
warmer in water for 15 minutes.
• Rinse it carefully with cold water without wringing it or rolling it up. Hang
the bed warmer in the air in horizontal position and allow it to drip dry
until completely dry.
• After washing the bed warmer, make sure it is completely dry before using
it again.
• Storage: Keep this product in a dry place with as few folds as possible and
do not place any heavy objects on it that could cause permanent creases.
12
Calientacamas CT8640-8645 12 4/1/07, 13:45:21