Access A Host - Promise Technology VTRAK 15100 Guide De Démarrage Rapide

Access a Host

The WebPAM PRO CIMOM Agent resides on the VTrak and sends the
monitoring data to the Utility Server and on to the Browser. In Tree View, a newly
created Host looks like this:
Each host is identified by an
appears. A host (VTrak) is made up of:
Controller – The Promise VTrak
Disk View – Shows all hard drives, assigned or not
Logical Drive View – Shows all logical drives under this Controller
Enclosure View – Monitors status of external RAID enclosures
If you do not see these details in the WebPAM PRO window, it
means your network connection to VTrak is not working. Restore
your connection before proceeding.
Step 10: Configure VTrak with WebPAM PRO
icon and its IP Address. Below it, the Controller
Note
29