dirna Bergstrom bycool green line LITE IVECO Instructions De Montage page 19

LITE
Run power cables to the hatch and secure the
12
supplied terminals on them, positioning the
supplied 2-way box.
Caution: Match the cables as indicated R=
(+) and N= (-).
Caution: The cable to be installed must be 6 mm section; the (+) cable must be protected with a 30A
!
fuse.
Important: Due to the equipment's complex electronic regulation system, the current connection must
be made directly to the battery point or authorised connection point, and not to any other point which
services other accessories of the vehicle, taking the precaution to not invert polarity when making the
connection.
Important: Check the user manual for starting up.
Place the console on the front and secure with
13
(4) 6/100x15 Allen screws, screwing on the
hexagonal spacers.
13
13
19
12
13
EN
®