dirna Bergstrom bycool green line LITE IVECO Instructions De Montage page 15

LITE
Screw an M8 nut on each M8 stud and
4
position a Ø8 flat washer and a rubber washer
as indicated.
(*) Iveco Stralis AD cabin (short cabin):
Stud M8 L=85.
(*) Iveco Stralis AT cabin (long cabin) and
AS cabin (extra long cabin): Stud M8
L=95.
Screw M8 studs in the base inserts, leaving
5
them at the indicated measurement and
tighten the nuts against the base of the unit.
(*) Iveco Stralis AD cabin (short cabin): 70
mm.
(*) Iveco Stralis AT cabin (long cabin) and
AS cabin (extra long cabin): 80 mm.
5
Screw an M8 nut on each stud and position a
6
Ø8 flat washer, position supports on the studs,
securing them with a washer and a self-locking
M8 nut without tightening.
Caution: The supports are placed below the
upholstery.
6
5
*
5
M8 Nut
Ø8 Flat
wide-rimmed
washer
M8 Self-locking
nut
15
EN
®
*
6
Support
Ø8 Flat wide-
rimmed washer