Denon DRA-F100 Mode D'emploi page 10

ENGLISH
Remote Control Unit Part Names and Functions
MD operation buttons
1 (play) button
Press this button to start playback.
2 (stop) button
Press this button to stop playback.
8 and 9 (automatic search buttons)
Use these buttons to search for the beginning of
the desired track.
POWER operation switch
Use this switch to turn on the
power of the entire system or set
the power to the standby mode.
SLEEP button
Press this button to set the sleep
timer.
Number buttons
Press these buttons after pressing
the TUNER button to recall preset
stations.
When playing a CD, press these
buttons after pressing the DIRECT
or PROGRAM button to specify
the desired track.
PRESET buttons
Use these buttons to recall preset
stations on the tuner.
When the PRESET UP or DOWN
button on the remote control unit
is pressed while in the standby
mode, the power turns on and the
receiver begins operating.
BAND (AM/FM) selector button
TUNING buttons
MEMO button
10
Cassette deck operation buttons
2 (stop) button
Press this button to stop the tape.
1 (forward play) button
Press this to start playback or
recording in the forward direction.
0 (reverse play) button
Press this to start playback or
recording in the reverse direction.
CD operation buttons
2 (stop) button
Press this button to stop playback.
1 (play) button
Press this button to start playback.
8 and 9
(automatic search buttons)
POWER
8 9 2 1
Use these buttons to search for
SLEEP RESET REC / MUTE
the beginning of the desired track.
DECK
6 7 2 0 1
EDIT RANDOM REPEAT 8 9
FUNCTION selector button
TIME
6 2
SIDE A/B 7 1
Press this button to switch the
PROGRAM CANCEL DIRECT TUNER FUNCTION
input (function).
1 2 3 4 5
The input changes in the
followingorder each time this
6 7 8 9 10
button is pressed: CD, TAPE,
PRESET MEMO +10
TUNER, PHONO, MD, AUX.
TUNING BAND
VOLUME
TUNER button
B
Press this button to switch the
REMOTE CONTROL UNIT RC-829
function to the tuner and to recall
preset stations from the remote
control unit using the number
buttons.
VOLUME buttons
Use these to adjust the volume.
The volume increases when the •
button is pressed and decreases
when the ª button is pressed.
Cassette deck operation buttons
• REC/REC MUTE button
To start recording from the stop
mode, press this button, then
press 1.
When this button is pressed POWER
8
during the recording, a blank
SLEEP
section of approximately
6 7
5 seconds is created, after which
the recording standby mode is set.
EDIT RANDOM REPEAT
6 (rewind) button
TIME
6
SIDE A/B
Press this button to rewind the
PROGRAM CANCEL
tape.
Press this button during playback
1 2
to set the music search mode (to
6 7
find the beginning of selections).
PRESET
7 (fast-forward) button
Press this button to fast-forward
TUNING
the tape.
Press this button during playback
to set the music search mode (to
find the beginning of selections). B
REMOTE CONTROL UNIT RC-829
RESET button
Press this button to reset the tape
counter to " ".
CD player operation buttons
DIRECT button
Press this button for direct search
on the CD player.
6 and 7
(manual search) buttons
Press these buttons during
playback to move quickly forward
or backward.
REPEAT button
Press this button for repeat
playback.
RANDOM button
Press this button to play the tracks
in random order.
PROGRAM button
Press this button for programmed
playback on the CD player.
9 2 1
CANCEL button
RESET REC / MUTE
Press this button to clear the last
DECK
track from the program.
2 0 1
TIME/SIDE A/B button
8 9
• TIME
2
7 1
Press this button during the play
or pause mode to switch the
DIRECT TUNER FUNCTION
time display.
3 4 5
Normally the elapsed time for
the track currently playing is
8 9 10
displayed. When this button is
MEMO +10
pressed, the display switches to
BAND the remaining time for that track,
the total remaining time on the
VOLUME
disc, then back to the elapsed
time per track.
During programmed playback,
the total remaining time display
indicates the total remaining
time of the programmed tracks.