Setting The Sleep Timer - Denon DRA-F100 Mode D'emploi

ENGLISH
Receiver (DRA-F100)
1
PERSONAL COMPONENT SYSTEM / AM-FM STEREO RECEIVER DRA-F100
B
REMOTE SENSOR
MHz
TIMER
TUNED STEREO AUTO
SYSTEM
ON / STANDBY
TUNING MONO / BASS TREBLE
DOWN UP BAND STEREO
PHONES
TIMER DISPLAY MEMORY FUNCTION
L
6 5
Example: Playing a compact disc with the timer
Press the SYSTEM power operation
switch (SYSTEM ON/STANDBY) on
1
the receiver to turn on the system's
power.
Press the CD player's OPEN/
2
CLOSE button (5) to open the disc
tray.
Load the disc in the disc tray.
3
Refer to page 15.
Press the CD player's OPEN/
4
CLOSE button (5) again to close
the disc tray.
Press the receiver's TIMER button
5
for at least 3 seconds.
Use the receiver's TUNING UP and
6
DOWN buttons to set the "CD"
mode.
7
Now follow steps 6 to 16 under "Setting the Timer" on page 13.
14
Various Timer Operations
CD player (DCD-F100)
2,4 3
VOLUME PERSONAL COMPONENT SYSTEM / COMPACT DISC PLAYER DCD-F100
B
CH OPEN/CLOSE
BALANCE ON / STANDBY
R
SYSTEM
ON / STANDBY
OPEN/CLOSE
B
TIME
TUNE R
D STER
EO
AUTO
MHz
CH
B
OPEN/CLOSE
TIMER
TIMER
TUNING
DOWN UP
TIMER
With this function, the power can be set to turn off after 10 to 60 minutes, in steps of 10 minutes, using the remote
control unit.
Example: Setting the power to turn off in 50 minutes
(This operation is only possible from the remote control unit.)
1
Tuner currently set to FM 87.5 MHz.
3
/ /
2
Press the SLEEP button.
Press the SLEEP button again while
3
the "SLEEP" indicator is flashing.
The previous display reappears
after 5 seconds.
4
The "SLEEP" indicator remains lit,
indicating that the sleep timer is
functioning.
• The time is reset to "60" (60 minutes) if the SLEEP button is pressed again while the sleep timer is functioning.
Press the SLEEP button repeatedly until the "SLEEP" indicator turns off.
The sleep timer is also cancelled if the receiver's SYSTEM power operation switch or the POWER operation switch on the
remote control unit is pressed, turning the system power off.
If the times set with the sleep and everyday timers overlap, the sleep timer has priority.
Order of priority of the sleep and everyday timers
The sleep timer has priority for the off time. (The system operates as indicated by the bold lines.)
8 : 00 p.m.
ON
Everyday timer set
Sleep timer set to 60 minutes
Even when the power was turned on with the timer, the power turns off if the remaining time of the sleep timer reaches
" " before the off time set with the everyday timer is reached. If the everyday timer's on time is reached while the
sleep timer is functioning, the everyday timer does not function.

Setting the Sleep Timer

TUNED STEREO
MD
POWER 8 9 2 1
SLEEP RESET REC / MUTE
DECK
7
6 2 0 1
EDIT RANDOM REPEAT 8 9
TIME CD
6 7 2
SIDE A/B 1
PROGRAM CANCEL DIRECT TUNER FUNCTION
1 2 3 4 5
we
Cancelling the Sleep Timer
NOTE:
9 : 00 p.m. 10 : 00 p.m.
OFF
SLEEP
ON OFF
MHz
Flashes
SLEEP
SLEEP
MHz
SLEEP