9
PLAYING CDs
About Compact Discs
COMPACT
Only discs with the mark shown left can
be played on the DCD-F100.
DIGITAL AUDIO
DIGITAL AUDIO
COMPACT
COMPACT
Use compact discs that include the
mark.
DIGITAL AUDIO
DIGITAL AUDIO
CD's with special shapes (heart-shaped CD's, octagonal CD's
etc.) cannot be played on this set.
Attempting to do so may damage the set. Do not use such
CD's.
• For CDVs, only the audio part is played. (The video part is
not played.)
2 Removing discs from their cases
2 Loading discs in the disc tray
As shown on the diagram,
grasp the outer edge of the
disc with your fingers,
insert a finger in the center
B
hole, press gently, then lift
the disc out of the case.
B
• The disc tray opens when the OPEN/CLOSE button (
• When the disc tray is closed, the disc turns automatically for several seconds, then the total number of tracks and
total playing time of that disc appear on the display.
• The disc tray can also be closed by pressing the play button (
first track on the disc (or if tracks are programmed, from the first programmed track).
Handling the Disc Tray
Do not turn off the power, stop the disc tray by hand or pull on it when
it is moving. Doing so may damage it.
If the headphones' cord or some other object accidentally gets caught in
the disc tray while it is closing and the disc tray stops, press the
OPEN/CLOSE button (
5
) again to open the tray and remove the
obstacle.
Do not set objects other than discs on the disc tray. Doing so may
damage it.
Disc
Remarks
CD
Only the audio part is
CDV
played.
CD singles
(8 cm discs)
Be sure to load the disc with
the labelled side facing up.
(Compact discs only play on
one side.) For 8 cm CDs, set
the disc in the sunken section
TIMER
TUNE
D STER
EO
AUTO
MHz
CH
in the center of the tray.
NOTES:
5
) is pressed once and closes when it is pressed again.
), in which case playback automatically starts from the
1
B
TIMER
TUNE
D STER
EO
AUTO
MHz
CH
B
Normal Playback
CD player (DCD-F100)
2,4
PERSONAL COMPONENT SYSTEM / COMPACT DISC PLAYER DCD-F100
B
OPEN/CLOSE
ON / STANDBY
1
Example: Playing a disc containing 15 tracks and with a playing time of 62 minutes, 03 seconds, starting from the
first track
The
R
mark indicates operations which can also be performed on the remote control unit.
Press the SYSTEM power operation
switch (SYSTEM ON/STANDBY) on
1
the receiver to turn on the system's
power.
OPEN/CLOSE
Press the OPEN/CLOSE button (5)
2
to open the disc tray.
3
Load the CD in the disc tray.
Press the OPEN/CLOSE button (
5
).
OPEN/CLOSE
The disc tray closes.
4
The display appears after several
seconds.
5
Press the play button (
1
).
R
3
5
3
/
/
ON / STANDBY
B
TIMER
TUNE
D STER
EO
AUTO
MHz
CH
B
1 2
3 4 5 6 7 8
9 10 11 12 13 14 15
1 2
3 4 5 6 7 8
9 10 11 12 13 14 15
ENGLISH
15