ENGLISH
Style
Temp
Setting
Curl
Time
Setting
, TIP: Size of the hair section also effects curl size; small sections create
tighter curls, larger sections create looser curls.
•
DO NOT use sections larger than 3cm.
•
Select your desired temperature. Press the temperature control button
repeatedly ( b ) until your desired temperature is displayed on the screen.
•
The selected temperature will flash continuously on the LCD display until
the desired temperature setting is reached. This will be indicated by an
audible beep.
•
DO NOT start styling until the selected temperature setting is reached.
•
Select your desired curling time by pressing the curling time selection
button, this will allow you to select between 5 and 15 seconds.
•
Your selected curling time will be displayed on the LCD digital display
screen.
•
To turn the curling time off set the timer to 0. By doing this you will not
receive an audible beep to signal your curl time.
•
The styler also allows you to create different curl directions.
•
Select your desired curling direction by sliding the curling direction switch
left d, right e, or to the centre position for alternating curls.
•
To ensure optimum performance please ensure that the sections of hair are
clean without any stray or loose hairs.
•
To avoid tangles use only a small amount of hair, working on one section at
a time.
•
Hold the handle with the curling chamber opening facing towards your
head.
•
Place the opening of the curling chamber at the location in your hair where
you want the curl to start.
, Warning: Do not place too close to your head.
Wavy Curls
130°C -
170°C
5 sec
Loose Curls
170°C -
190°C
10 sec
Tight Curls
190°C -
230°C
15 sec
5