tomado TGH6001W Mode D'emploi page 17

• Faulty parts may only be replaced by original parts meet safety
requirements.
• Damage caused by incorrect connection, incorrect fitting,
or incorrect use is not covered by the warranty.
• If the connecting cable is damaged, it may only be replaced
by the manufacturer, the manufacturer's service organisation
or equivalently qualified persons, in order to avoid dangerous
situations.
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• The worktop onto which the hob is placed, should be flat.
• The walls and the worktop surrounding the appliance must be heat
resistant up to at least 90°C. Even though the appliance itself
does not get hot, the heat of a hot pan could discolour or deform
the wall.
EN - 17