How To Assign The Interpreter Id - Beyerdynamic MCS-D 202 Notice D'utilisation

MCS-D 202 – Interpreter ID
6.

How to assign the Interpreter ID

Each interpreter station should be specified with an identification number (ID) in order to render an address. This may be done via the
INTERPRETER IDs menu of the MCS-D 200 control unit.
Optional, the identification numbers may directly be assigned at each interpreter station one after the other. This way, you will always have
an overview of the system, especially of large systems.
An interpreter station ID (identification number) is composed of the BOOTH ID and the DEVICE ID. Please make sure that every identification
number is only assigned once in order to avoid conflicts. Interpreter stations of different booths may have the same DEVICE ID.
For example:
Booth 1: MCS-D 202 microphone station (1): 01-0001
MCS-D 202 microphone station (2): 01-0002
Booth 2: MCS-D 202 microphone station (1): 02-0001
MCS-D 202 microphone station (2): 02-0002
01 = BOOTH
Activate SET ID mode
Press the following three buttons one after the other:
1. Right relay channel PRE-SELECT button
2. Right output channel PRE-SELECT button
3. Press MENU button
1. Press right relay channel PRE-SELECT button
The "SET ID" line appears on the left display.
01-0001= MICROPHONE STATION ID
2. Press right output channel PRE-SELECT button
0002 = DEVICE-ID
24
3. Press MENU button