Unpacking And Set-Up - THORENS TD 1600 Manuel D'utilisation

Unpacking and set-up

Carefully take the record player and all accesso-
ries out of the carton.
Warning: The external power supply is placed in
a separate compartment inside the Styrofoam
packaging.
Remove the two transport locking screws next to
the inner plate (Fig. 1). you
are located in front of and behind the inner plate
and fix the sub chassis for transport.
Remove the drive belt of the packaging and place
it around the inner platter and then around the
drive pulley of the motor to the left of the inner
platter (Fig. 2). When the belt is placed, turn the
platter a few rounds by hand so that the belt lays
evenly around the plate.
UNPACKING AND SET-UP
27
Fig. 1, seen from left side
Fig. 2