BLC
WDR
ENHANCEMENT
Function
DSS
DAY/NIGHT
ANTI-ALIASING
Here you can set the backlight compensation (BLC).
High contrasts, like a window in the picture area, are often hard to
recognize, since they turn out very dark. By using the BLC function
you can mark these areas and brighten them up.
BLC: ON / OFF
Here you can turn the function on / off.
BLC AREA:
By pressing the ENTER Button you can select fields which shall be
brighten up.
Here you can adjust the wide dynamic range of the camera.
High contrasts, like a window in the picture area, are often hard to
recognize, since they turn out very dark. By using the WDR function
(Gamma WDR (GWDR)) dark areas are brighten up and bright areas
are darkened in order to receive a clear picture. This function can be
used in difficult light conditions and is an improvement of the BLC
function.
WDR: ON / OFF
Here you can turn the function on / off.
WDR LEVEL: 1 – 9
The lower the value, the brighter the complete picture will be.
Description
Here you can set the digital picture integration (SENSE-UP), day/night
switching and anti-aliasing.
At low light conditions information of several pictures are integrated
into one picture in order to receive a more detailed picture. As a
consequence the frame rate will drop.
DSS: ON / OFF
Here you can turn the function on / off.
DSS LEVEL: 1 – 9
The higher the value, the more details will be visible, but with a lower
frame rate.
At low light conditions the camera switches from day mode (color) to
night mode (b/w) and can be used with IR illuminators.
DAY/NIGHT: OFF / AUTO / Ext
OFF : Day/Night switch off
AUTO . Day/Night switch AGC controlled
Ext : Day/Night switch by sensor on camera front side
AUTO TIME: 1 – 60 SEC
Here you can set the delay time for the day/night switching. The lower
the value, the faster the camera switches between the day/night
modes.
Here you set the anti-aliasing function.
ANTI-ALIASING: 1 – 9
The higher the value, the better the anti-aliasing function, but the
image will look softer.
27