Confi Guring The Settings; Configuring The Hot Water Settings - Ariston E8.5064 Cascade Manager Mode D'emploi

GB

confi guring the settings

CONFIGURING THE HOT WATER SETTINGS

Open the door, turn the control and select:
the "USER" fi eld and the "HOT WATER" level, then:
• press the programming button
• turn the control and select the "T-AC 1" parameter;
• press the programming button
PARAMETER
T - - DHW 1
T - - DHW 2
T - - DHW 3
46
(red LED on);
DISPLAY SCREEN
T - - DHW 1
6 0 . 0
PRESS THE PROGRAMMING BUTTON "
TURN THE CONTROL AND SELECT THE "T - - DHW 2"
PRESS THE PROGRAMMING BUTTON "
T - - DHW 2
6 0 . 0
PRESS THE PROGRAMMING BUTTON "
TURN THE CONTROL AND SELECT THE "T - - DHW 3"
PRESS THE PROGRAMMING BUTTON "
T - - DHW 3
6 0 . 0
PRESS THE PROGRAMMING BUTTON "
TURN THE CONTROL AND SELECT THE "RETURN" PARAMETER
PRESS THE PROGRAMMING BUTTON "
FIGURE DESCRIPTION
Turn the control and set the temperature of
60
the boiler for the fi rst timer, in °C (e.g. "60").
"
" (
RED LED ON)
Turn the control and set the temperature of
60
the boiler for the second timer, in °C (e.g. "60").
"
" (
RED LED ON)
Turn the control and set the temperature of
60
the boiler for the third timer, in °C (e.g. "60").
"
" (
TO EXIT)