Complete Installation - Jennair JVR0430HS Instructions D'installation Et Guide D'utilisation Et D'entretien

4.
Secure power cord
mm
Using the wire clamp provided, secure the wire as shown.
■
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
5.
Plug into a grounded 3 prong outlet

Complete Installation

1.
Install plastic transition
. .
mm
Align the plastic transition to the bottom of the charcoal filter
■
bracket and fasten it with the 2-2.9 x 6.5 mm screws.
2.
Install duct
"
6 (15.2 cm)
Slide the duct into place ensuring it is placed over the
■
exhaust of the hood and over the plastic transition.
Secure in place with the duct clamps.
■
NOTE: Use of flexible duct is recommended.
13