Sportec 27535 Mode D'emploi page 47

6. Once you have selected the condition you want to treat, you will be taken to the first image
below. Tecarpuls is ready to start treatment. You can now start the treatment by pressing the
button on the treatment probe. You will see that timer is counting down. You can press the
pause button / stop button at the treatment handle at any time. Likewise, you can adjust the
strength up or down from the handle at any time.
7. There is a separate image for adjusting the brightness of the display on the device itself.
8. You can also make all adjustments during treatment by tapping the arrows on the display itself
during processing.
9. If you want to use other than the predefined settings, you can choose manual settings
yourself. However, this is only recommended when you are familiar with treatment with
Tecarpuls, and requires a close dialogue with the patient.
14 of 32 EN109-1730752-41