Installing The Appliance; Dismantling The Appliance; Switching On The Appliance; Switching Off The Appliance - Bosch BBS61 Manuel D'utilisation

en Cleaning and servicing
You can delay the natural wear by
¡
using the following measures:
– Only charge the battery in the
temperature range between
0 °C and 45 °C.
– Only store the battery in the tem-
perature range between -20 °C
and 50 °C.
– Do not store the battery for an
extended period of time if it is
fully charged or fully discharged.

Installing the appliance

Place the suction pipe onto the ap-
1.
pliance's connection port and lock
it in place.
→ Fig.
9
Insert the end of the suction pipe
2.
into the floor nozzle and lock it in
place.

Dismantling the appliance

Press the release button and pull
1.
the suction pipe out of the floor
nozzle.
→ Fig.
10
Press the release button and pull
2.
the suction pipe out of the appli-
ance's connection port.

Switching on the appliance

Press ⁠ .
▶
→ Fig.
11
a The status display lights up white.

Switching off the appliance

Press .
▶
a The status display goes out.
1
Depending on the appliance specifications
36

Using turbo mode

Requirement: The appliance has
been switched on.
→ "Switching on the appliance",
Page 36
Press
▶
→ Fig.
12
a The status display flashes white.

Vacuuming with accessories

Place the required accessory onto
1.
the suction pipe or the appliance's
connection port.
→ Fig.
13
After use, insert the accessory into
2.
the base station
→ Fig.
14

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.

Cleaning products

Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
Do not use hard scouring pads or
▶
cleaning sponges.
Wash sponge cloths thoroughly
▶
before use.
.
1
.