Maintenance - Technical Data - Quick SBC 300 ADV PLUS FR Manuel De L'utilisateur

Masquer les pouces Voir aussi pour SBC 300 ADV PLUS FR:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

MAINTENANCE
The battery charger does not need any maintenance. To ensure optimum performance from the equipment,
once a year check the cables and the electrical connections.
TECHNICAL DATA
MODEL
OUTPUT CHARACTERISTICS
(1)
Maximum output current
Charge absorption voltage
Charge float voltage
(2)
Residual ripple
Charging characteristics
(3)
Number of outputs
INPUT CHARACTERISTICS
Supply voltage
Frequency
Maximum absorption
(4)
(230/240 Vac)
Maximum absorption (115 Vac)
Power factor (cos ϕ )
PROTECTION
(6)
Reverse polarity
Overload
Output short circuit
(7)
Overvoltage in output
Overheating
Battery overtemperature
AMBIENT CHARACTERISTICS
Operating temperature
Cooling
Humidity
CASE
Material
Colour
Dimensions (WxHxD)
Weight
GENERAL
CAN bus interface
Safety classification
EMC class
(1)
Maximum value at normal use or in short circuit.
(2)
At maximum output current on resistive load.
(3)
Each output can supply the maximum value of nominal current. The sum of the currents supplied from each output can not exceed
the maximum nominal value of the equipment.
(4)
With supply voltage as equal 230Vac and output current equal to the maximum nominal value.
(5)
With supply voltage as specified and output current equal to the maximum nominal value.
(6)
Protection may be inefficient in some operative conditions.
(7)
Software/hardware double-check.
Cycoloy
®
is a registered trade mark of GE Plastics.
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
SBC ADVANCED PLUS MEDIUM - REV005A

MAINTENANCE - TECHNICAL DATA

SBC 300 ADV PLUS FR
30 A
2,5 A
(5)
5,1 A
272 x 334 x 127 mm
4,2 kg
EN 55022/B
SCB 500 ADV PLUS FR
SBC 700 ADV PLUS FR
40 A
14,1 Vdc (14,4 Vdc GEL)
13,5 Vdc (13,8 Vdc GEL)
30mV RMS max
Automatic in three stages IU o U
3
280÷83 Vac, with power reduction under 97 Vac
45÷66 Hz
3,3 A
6,8 A
1
Yes, through fuse
Yes
Yes
Yes
Yes
Yes, optional
-20 ÷ +70 °C, with power reduction over +50 °C
Forced, by variable speed cooling fan
Max. 95% RV without condensation
Stainless steel - Cycoloy
Polished steel - OR5066
Yes
EN 60335-2-29
SBC 650 ADV PLUS FR
60 A
30 A
28,2 Vdc (28,8 Vdc GEL)
27,0 Vdc (27,6 Vdc GEL)
4,8 A
4,5 A
9,8 A
9,5 A
®
272 x 412 x 127 mm
5,4 kg
EN 55022/A
GB
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sbc 500 adv plus frSbc 700 adv plus frSbc 650 adv plus fr

Table des Matières