Troubleshooting; Environmental Protection; Available Accessories - Jet JSS-16A Mode D'emploi

10. Trouble shooting
Motor doesn't start
*No electricity‐
check mains and fuse.
*Defective switch, motor or cord‐
consult an electrician.
*Motor brushes worn‐
replace brushes.
Machine vibrates excessively
*Stand on uneven surface‐
adjust base for even support.
Cut is not square
*Bevel stop setting is bad.
Cutting surfaces is bad
*Wrong sawblade used
*resin collection on sawblade
*sawblade is dull
*sawblade damaged‐
replace sawblade immediately
*workpiece inhomogeneous
*Feed pressure too high‐
do not force the workpiece.
11. Environmental protection
Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled. Please leave it at a specialized
institution.
12. Available accessories
Stock number 10000809
Set of 5 sawblades (pin type)