Turning The Unit On/Off; Turning On - Sony PCS-DS150 Mode D'emploi

Turning the Unit On/Off

This section describes how to turn the unit on and off.
Note
When you operate the Document Stand using the PCS-R160
Remote Commander, set the CONF/DOC/TV selector on the
Remote Commander to "DOC".
For details on the operation from the Remote Commander, see
"Operating the unit using the PCS-R160 Remote Commander"
on page 65.

Turning On

The following describes how to turn on the unit.
1
2
Connect the PCS-AC08, AC adaptor to the unit and the
power source.
The power lamp (red) on the unit lights up, and the unit
will be on standby.
Press the I/1 switch.
The power lamp (green) on the unit lights up, and the unit
is turned on.
Power lamp
I/1 switch
51