Machine Description; Transport And Start Up; Transport And Installation; Assembly - Jet JBS-22 Mode D'emploi

Conveyor Table Assembly (O)
Handwheel Knob (P)
Handwheel (Q)
Infeed/Outfeed Table (U)
Open-end Wrenches (V)
Hex Wrenches (X)
4 Legs (R)
4 Wheels (W)
2 Assembly Fixtures (Z)
Operating manual
Spare parts list.
Fig 1
Fig 2
Fig 3
Fig 4

4.5 Machine description

A....Dust hood
B....Carriage arm
C....ON/OFF switchbox
D....Digital height scale
E....Feed control knob
F....Belt guard
G....Motor support
H....Motor
5
Fig 5
I.....Table support
J....Bearing lock knob
K.....Brush adjust lever
O....Conveyor table
Q....Height adj. handwheel
R....Leg
U.....Table extensions
W.....Wheels

5. Transport and start up

5.1 Transport and installation

The machine is designed to operate in
closed rooms and must be placed
stable on firm and levelled ground.
The machine comes with 4 wheels,
but can be bolted down if required.

5.2 Assembly

If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
machine!
Dispose of the packing in an
environmentally friendly manner.
Clean all rust protected surfaces with
a mild solvent.
For packing reasons the machine is
not completely assembled.
Stand assembly
WARNING:
Main unit is heavy (150kg)!
Assure the sufficient load capacity
and proper condition of your lifting
devices.
Never step underneath suspended
loads.
Use great care when lifting the unit.