Cautions For Use; About The Unit - Panasonic LUMIX DMW-XLR1 Manuel D'utilisation

Cautions for Use

∫

About the unit

Do not use this unit near radio transmitters or high-
voltage lines.
• Noise may be present in images and sound recorded near
radio transmitters or high-voltage lines. Perform recording
in locations away from them. The level of noise varies
depending on the XLR microphone used.
Keep the unit away from insecticide sprays and other
volatile substances.
• Exposure to such substances may cause damage to the
external case and the text and symbols printed on the unit.
• Do not leave the unit in contact with any items made of
rubber or PVC for prolonged periods of time.
Do not carry the unit with your hands while it is still
attached to a digital camera.
• Under no circumstances should the unit be used or stored
in any of the following locations since doing so may cause
trouble in operation or malfunctioning:
– In direct sunlight or on a beach in summer
– In locations with high temperatures and humidity levels or
where changes in temperature and humidity are acute
– In locations with high concentrations of sand, dust or dirt
– Where there is fire
– Near heaters, air conditioners or humidifiers
– Where water may make the unit wet
– Where there is vibration
– Inside a vehicle
• Do not drop the unit, knock it into other objects or subject
it to any other kind of strong impact or shock.
• When recording a motion picture, the digital camera or
lens sounds or other operating noise may be recorded. If
the sound from the lens is particularly bothering, set the
camera to manual focus during use. If the operating noise
is particularly bothering, position the microphone away
from the digital camera during use.
• If the terminals are dirty they can cause faulty
connections. Wipe clean with a soft dry cloth before
connecting.
• Do not attach or remove cables with the power of the
digital camera turned [ON].
• Before use, check that the XLR microphone adaptor is
recording normally.
• Do not disassemble or modify this unit.
∫
Cleaning
When cleaning, wipe the unit with a dry soft cloth.
• When the unit is soiled badly, it can be cleaned by wiping
the dirt off with a wrung wet cloth, and then with a dry
cloth.
• Do not use solvents such as benzine, thinner, alcohol,
kitchen detergents, etc., to clean the unit, as these may
damage the external case and the text and symbols
printed on the unit.
• When using a chemical cloth, be sure to follow the
accompanying instructions.
9
(ENG) DVQX1208