Switching Time Zones; Viewing Temperature And Air Pressure Data; Baro - Barometer Mode - Timex EXPEDITION W-195 Mode D'emploi

Switching time zones

If you wish to switch to the secondary time zone, simply
continue holding the STOP/RESET button until the time
zone indicator (T1 or T2) stops flashing (this takes about
three seconds). This will be your new primary time zone
until you switch it back.

Viewing Temperature and Air Pressure Data

While in TIME mode, press and release the START/SPLIT
button to view the following information on the lower line
of the watch display:
• The current air pressure
• The current temperature
• The month and date
22

BARO - Barometer Mode

Want a better understanding of the forces that influence
the weather? This is the mode to do just that – here you
can view the current air pressure (local and sea level),
monitor the current temperature and study the changes in
air pressure over time, presented in a graphical format.
Finally, the weather forecast for the next 4 - 6 hours is
shown at the top of the display.
23