LaserLiner GreenLine-Laser 2 P Mode D'emploi page 12

GreenLine-Laser 2 P
4
6
Green laser technology
Unlike red lasers, green laser light can only be indirectly generated. Because
of the system, therefore, fluctuations may occur:
• Difference in brightness between horizontal and vertical laser line
• Different levels of line brightness between one device and another.
• The optimum operating temperature is 20°C. Outside of the working
temperature range of 0-40°C, green lasers become darker.
TIP: Before switching on the device, wait until it has had time to adjust to
the ambient temperature.
These fluctuations are excluded from claims.
12
Alignment
For approximate alignment, the upper part
of the device can be turned on the base.
Exact positioning can be done with the
adjusting knob (4). Because of the
adjustable feet (6), the device can also be
placed on surfaces which are not level.
Use with tripod
For easy use, the GreenLine-Laser can be
mounted on a tripod (5/8" thread). To do
this, the upper part must be removed from
the base.
ENGLISH