Güde GH 2501 Traduction Du Mode D'emploi D'origine page 22

Broyeur electrique de vegetaux
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Wear safety gloves when changing the knife!
Open the cover and loosen the knife (pic. 4).
A rotating knife is inbuilt in your garden shredder.
Therefore, you must just turn the knife and tighten it using
the Allen key when replacing the knife for the first time.
Close the cover again after turning/changing both knives.
Troubleshooting
The table shows possible failures, their causes and
remedy options. If the problem still cannot be removed,
contact a professional to help you.
Switch the machine off and unplug it before any
servicing and cleaning.
Risk of electric shock.
Symptom
Possible cause
Machine
Collection box not
not running
fitted properly
Feeding hopper not
fitted properly
Defective outlet
Extension cable is
damaged
Fuse has been
activated
Overload protection
has been activated
Shredded
Shredded material
material
is wet and soft
not pulled
in
Shredded material
has got jammed in
the machine
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Remedy
Install the collection box
properly
Install the feeding
hopper properly
Use another outlet
Check or replace the
cable
Change the fuse
Press the overload
protection button (pic.
A/8) and remove the
blocking as specified in
"Operation"
To insert the shredded
material in the machine,
use the sliding part
Remove the blocked
shredded material
(safety gloves to be
worn at all times)
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

94372

Table des Matières