Take the machine out of the package and install the
axis, transport wheels and the collection box
(pic. 1-2).
Operation
Put the machine on a solid and even surface at all times.
Never tilt or move the machine when the engine is running.
Caution! The engine runs down after switching the
machine off.
Remove earth from root balls and prevent undesirable
items, e.g. stones, glass, metals, plastic or textile materials
from entering the feeding hopper and subsequently to the
machine and cutting cylinder as the machine could get
damaged.
The feeding hopper must be empty.
Switching the machine on:
Press the ON/OFF switch (pic. 5) up.
Switching the machine off:
Press the ON/OFF switch (pic. 5) down.
Restart protection
The restart protection prevents accidental machine start
after power failure.
Overload protection
If the machine is exposed to a high load (e.g. cutting
cylinder is blocked), it stops after a couple of seconds.
Working instructions
Insert only such amount of shredded material that
the feeding hopper does not get blocked.
Do not shred soft waste without any solid
consistency but compost it straight away.
Make sure the shredded material falls to the
collection box or collection bag unobstructed –
risk of getting blocked!
Optimum results are achieved when shredding
fresh branches shortly after they have been cut.
Never touch in the opening, not even when the
engine is off. Knives are sharp! To insert shredded
material in the opening, use the feeding help.
Marking
Product safety:
Product corresponds to
applicable EU standards
Prohibitions:
No pulling the plug!
Warning:
Protect against rain and
moisture!
Warning/Caution
Warning against thrown-
away items
Unsuitable for outdoor
spaces
Commands:
General command sign
Use protective glasses and
headphones
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Any defective and/or
disposed electric or
electronic devices must be
delivered to respective
collection centres.
Package:
Protect against moisture
Caution - Fragile
This side up
Technical specifications:
Voltage frequency
16
Warning against dangerous
voltage
Warning! Rotating machine
represents a risk of injury!
Keep bystanders in safe
distance from the machine.
Please read the Operating
Instructions before using the
machine
Protective gloves to be used
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Interseroh-Recycling
Max. output