Installation; Before Starting The Appliance; Before Using Your Appliance - AVG ARBM104S Guide D'installation Et D'utilisation

2. INSTALLATION

RECOMMANDATIONS
WARNING
BEFORE CONNECTING THE APPLIANCE
You should make sure that you have a properly grounded outlet that is compatible with the appliance plug.

BEFORE STARTING THE APPLIANCE

We recommend that you wait at least 2 hours before connecting the unit to allow the refrigerant to flow back
to the compressor.

BEFORE USING YOUR APPLIANCE

1. Before placing food in your appliance, plug it in and wait 24 hours to ensure it is working properly and
that it reaches the correct temperature. Your appliance should not be overfilled.
2. Do not place bottled or sealed liquid products such as beer and soft drinks in the freezer as they may
explode.
3. Do not store or place dry ice in refrigerator.
4. It is recommended to place the appliance in a place where the ambient temperature is between 16° C
and 32° C. The unit may not operate properly if it remains at a temperature above or below the
indicated range.
5. Install your appliance in a dry place, avoid highly humid locations.
6. Do not expose the unit to direct sunlight, rain or frost.
7. Do not install the appliance near heat sources such as stoves, fireplaces, or radiators.
8. The appliance requires power supply of 115V / 60Hz AC.
9. Do not use the appliance if the power cord is damaged or the plug is worn.
10. Do not place flammable, explosive, volatile and highly corrosive objects in the appliance as they may
cause damage or even fire.
11. Do not place flammable objects near the appliance.
12. This product is a household appliance and should only be used for food storage. According to national
standards, refrigerators should not be used for any other purposes, such as storing blood, medicines
or biological products.
13. The location of the power outlet must be accessible when installing the appliance and must be
grounded.
14. When connecting to an electric outlet, do not use extension cords or power bars as they may overload
the system and cause a fire.
15. Plug your appliance into a stand-alone electrical outlet with a voltage matching what is indicated on
the rating plate. Do not plug other appliances on the same outlet.
16. Make sure the plug is not squashed or damaged. Failure to do so could result in a short circuit,
electrical shock or fire.
19