Accessories - Holmatro M 30 Série Mode D'emploi

7.4.3 Dust caps
• Check the dust caps for damage. Replace damaged dust caps.
• Clean the dust caps with running water. Dry the dust cap and treat it with preservative oil.
7.5 Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once per year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis. Depending on
the intensity of use of your equipment, we can supply a suitable maintenance solution.
8 Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
• Make sure that the equipment is put out of order so it can no longer be used.
• Various parts can be re-used. The equipment is made of steel, aluminium, nitrile butadiene rubber
(NBR) (sealings) and plastic.
• The equipment does not contain any pressurized components.
• Collect all dangerous substances separately and dispose of them in an environmentally responsible
way.
• Consult the Holmatro dealer about recycling.
9

Accessories

The following parts are available as accessories. Contact the Holmatro dealer for more information.
/i
Connection plate
Model Art. no.
M301 100.181.301
M302 100.181.302
/i
Pressure regulator
Model Art. no.
M303 100.181.303
/i
M30* / M31* / M32* / VM43L
Connection Description
1/2" NPT, female An adapter to fit on a pump or
1/4" BSP, female pressure regulator.
1/4" BSP, female An adapter to connect remote
valves or valves, which are not
connected to the pump (can be
in combination with pressure
regulator M303).
Connection Description
To fit to the pump or to the
connection plate M302 to
regulate the pressure.
Pressure is adjustable between
0 and 720 bar.
916.219.149_006
Can be used with
all pressure gauges and
remote valves
M311, M322-M325
Can be used with
M301, M311, M322-325
EN
33