Promise Technology Super Trak EX16300 Guide De Démarrage Rapide page 13

Step 5: Install Software Drivers
Drivers for the Windows operating systems are included on the CD that came
with your SuperTrak Controller card. Please download the latest drivers from the
Promise website at www.promise.com/support.
Windows systems usually recognize the SuperTrak Controller, prompt you for the
CD or diskette and perform the driver installation automatically.
If you are installing the SuperTrak Controller at the same time as your operating
system or you prefer to read step-by-step directions, see Chapter 3 of the
SuperTrak EX16300, EX16350 User Manual on the software CD.
Step 6: WebPAM Installation
A complete set of installation instructions is found in Chapter 2 of the SuperTrak
EX16300, EX16350 User Manual on the software CD.
These browsers support WebPAM: Internet Explorer, Mozilla, Firefox and
Netscape Navigator. If you do not have one of them, install the browser first and
make it the default. Then install WebPAM.
Windows
Follow these steps to install WebPAM on your Windows-based PC or Server.
1. Boot up the PC/server and launch Windows.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. Double-click on the Install CD's icon to open it.
4. Double-click on the Installer icon to launch it (right).
The first WebPAM installation dialog box appears.
5. Follow the prompts in the installation dialog box.
Linux
Follow these steps to install WebPAM on your Linux-based PC or Server.
1. Boot up the PC/server and launch the Linux GUI.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. In the CD window, double-click on the webpam...bin icon to
begin installation (right).
4. When the Run or Display? dialog box appears, click Run in
Terminal .
Step 5: Install Software Drivers
13