Promise Technology Super Trak EX16300 Guide De Démarrage Rapide page 12

SuperTrak EX16300, EX16350 Quick Start Guide
In the popup menu, highlight your choice of RAID Level and press Enter.
The available RAID Levels depend on the number of physical drives you
selected for this logical drive.
8. Press the arrow keys to highlight Logical Drive Name. Type a name for your
logical drive and press Enter.
9. To use less than the full physical drive capacity for this logical drive, highlight
Capacity and press Enter.
Press the Delete or Backspace keys to erase the current capacity. Type the
new capacity in MB to allocate to this logical drive.
Later, you can assign the unused capacity to a second logical drive.
10. To change the Stripe Size, highlight Stripe Size and press Enter.
Highlight your choice of 32, 64 or 128 KB and press Enter.
11. To change the Initialization Mode, highlight Init Mode and press Enter.
Highlight your choice of No, Quick or Full initialization and press Enter.
12. To change the Write Cache Policy, highlight Write Cache Policy and press
Enter.
Highlight your choice of Write Through or Write Back and press Enter.
13. To change the Gigabyte Boundary feature, highlight Gigabyte Boundary and
press Enter.
Highlight your choice of No or Yes and press Enter.
14. Highlight Save Configuration and press Enter.
The Logical Drive Management screen appears with your new logical drive.
At this point you can create additional logical drives, if there is physical drive
space available.
15. Press the F10 key to exit the SuperBuild utility and press Y to confirm and
restart the computer.
Do not press the Ctrl-Alt-Del keys. Do not press the Esc key.
You have successfully created a new RAID logical drive.
12