Operation / Display - THEIS VISION 2N AUTOSLOPE ALIGN Instructions De Service

(3) There must be no obstructions between laser and detector,
otherwise this will impact the search speed and make search-
ing more difficult.
(4) If a second normal detector is to be used during the ALIGN
state, to determine intermediate points, for example, take care
that you do not cover the receiving field of TE 90 ALIGN with
this detector, but remains below or above it. This could result
in an incorrect result.

12.2.2 Operation / display

TE 90 ALIGN
Turn on the detector.
Detector orientation:
Text „TE 90 ALIGN" up-
right readable.
Device symbol must be
displayed.
Press A key briefly.
Start ALIGN in X axis.
Display.
Press A key briefly:
ALIGN deactivated.
Detector is now in
standard operation and
can be removed.
Table 4: ALIGN - Function vertical
VISION 2N ALIGN
Turn on the laser.
Display up.
Laser leveled.
Laser searches for
detector:
H Detector found.
Detector - Tracking stops.
Laser in vertical standard opera-
tion.
57
ALIG
– – –