Pairing Of Laser Und Detector - THEIS VISION 2N AUTOSLOPE ALIGN Instructions De Service

13. Pairing of laser und detector

Attention:
The pairing between the laser and the detector is performed at
the factory and should only be performed by the user if at least
two ALIGN systems are used at the same time and interference
occurs.
In this case, the frequency of laser and detector must be ad-
justed as follows.
Settings Laser
InFo INFO- display
ALIG
CHAn
ALIG
PAIr
Settings TE90 ALIGN
rdo ...occurs in the menu
Switch on the laser
Press for five seconds
Press for three seconds
ALIGN channel selection
Select channel 0 – 35.
Start pairing
Display flashing, Laser wait for TE 90 ALIGN
Switch on detector
Press for 3 seconds until the menu opens
Press twice
59