Settings And Adjustments - Life & Mobility Vivo Mode D'emploi

CE­sticker
G
Freewheel lever
Electric driving position
Push position
Product description
Markings on the mobility scooter
There are a number of stickers on the mobility
scooter. Below is an overview of these stickers,
with their location.
CE­sticker
The mobility scooter meets the provisions of
the Directive for Medical Devices and has a
CE label.
The CE sticker can be found on the seat column
on your mobility scooter.
Freewheel sticker
The sticker above the freewheel lever (G)
indicates the "push position". In this setting the
mobility scooter can be moved freely.
The sticker below the freewheel lever indicates
that the mobility scooter is ready to be
electrically driven.
a
Changing the seat width
B
Armrests
M
Change steering angle
EN16

Settings and adjustments

The user can define settings and make adjust­
ments. If you have any doubts about your skills,
please contact your dealer.
Adjust seat width
1. Loosen the socket screws (a) on the bottom­
rear of the seat.
2. Set the width to suit your personal
requirements.
3. Re­tighten the socket screws.
The arm rests are now locked in the current
position.
Armrests
Fold the armrests (B) up to make getting­out
easier.
Adjusting the steering angle
Attention:
ƒ Do not adjust the angle of the steering
column while driving.
Adjust the steering column so that you can easily
reach the controls and the display. The steering
column can be adjusted by a toothed­wheel.
1. Loosen the rotary button (M) at the bottom
of the steering column.
2. Adjust the steering column to the required
angle.
3. Again tighten the rotary button; ensure that
the teeth match each other.
The steering column is now locked in place.
EN17