SOLAC CT8629 Mode D'emploi page 10

Ensure that the electronic connector is proper-
•
ly attached to the appliance.
Connect the appliance to the mains.
•
Move the temperature control switch. It will
•
start at level 0 (no heating). Continue to slide
the control switch to increase the temperature
up to 3, the maximum level.
The pilot light comes on.
•
As a security measure, the appliance is pro-
•
grammed to turn off automatically after 90 min.
of continuous use.
If the appliance is stopped in this way, the pilot
•
light (8) will blink to indicate that this function
has been activated.
To turn it on again, you simply have to slide the
•
temperature control switch to position 0 and
then select the desired temperature level.
Long term use setting '1'
•
ONCE YOU HAVE FINISHED USING THE AP-
PLIANCE:
Turn the appliance off, using the temperature
•
control (7) to 0 position
Unplug the appliance from the mains.
•
Clean the appliance.
•
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
The pad may be washed by machine at a tem-
•
perature of up to 40ºC. Remove the control be-
fore washing (Fig. 1). The control must never
be submerged in water.
Dry the product immediately after any clean-
•
ing task making sure that the appliance inlet is
perfectly dry.
The pad has a removable cover that can be
•
washed by hand or machine at a temperature
that does not exceed 40 ºC. (Only for models
CT8636, CT8642)
Do not use the pad if the removable cover is
•
not completely dry. (Only for models CT8636,
CT8642)
Never submerge the connector in water or any
•
other liquid or place it under running water.
WHEN NOT IN USE, STORE AS FOLLOWS:
Let the appliance cool down before putting it
•
away.
When the appliance is not in use, keep in a dry
•
place and avoid placing heavy objects on top
as they could damage the cables.
Avoid creases forming. Check the appliance
•
and power cord frequently to make sure they
are in perfect condition.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
•
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
•
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations
•
of substances that could be considered harm-
ful to the environment.
- This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic Equipment
(WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage and Directive 2014/30/
EU on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products.
EN