Step 3 - Install Bottom Plate - Haier HLP21N Guide De L'utilisateur

STEP 3 - INSTALL BOTTOM PLATE

Install bottom cover.
Lock all four casters prior to operating washer.
Failure to do so can result in death, electric shock or personal injury.
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Place the bottom plate against the bottom of the washer, with the side marked
"face to floor" facing you, and the end marked "front" aligned with the front of
the washer.
Front
WARNING
Electrical Shock Hazard
WARNING
Electrical Shock Hazard
Front
13