Electrical Requirements - Haier HLP21N Guide De L'utilisateur

ELECTRICAL REQUIREMENTS

The washer must be connected to a properly grounded 120 volt, 60 Hz.,
AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or
circuit breaker is recommended.
Failure to do so could result in death, re or electric shock.
•
If you are in doubt the electric supply provided meets the above requirements,
contact a licensed electrician.
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
•
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required.
A time-delay fuse or circuit breaker is recommended. It is recommended that a
separate circuit breaker serving only this appliance be provided.
•
This washer is equipped with a power supply cord having a 3 prong grounding
plug.
•
To minimize possible shock hazard, the cord must be plugged into a mating,
3 prong, grounding-type outlet, grounded in accordance with local codes and
ordinances. If a mating outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded outlet installed by a
qualified electrician.
WARNING
Electrical Shock Hazard
WARNING
Electrical Shock Hazard
9