Removing Clogs - Panasonic MC-V325 Manuel D'utilisation

Removing Clogs

Cover
(Suction Inlet)
Couvercle
(entrée
d'aspiration)
Cubierta
(Abertura de
aspiración)
Hose
Tuyau
Manguera
Hose
Tuyau
Manguera
Nozzle Pipe
Tuyau de la
tête d'aspiration
Tubo de la
boquilla
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Unplug vacuum.
Pull open suction inlet cover and
check for clogging.
Disconnect wand from short hose
and check the wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in
and out to remove clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Turn vacuum over and inspect
agitator area for clogs.
- 38 -