Cleaning Agitator; Replacing Agitator; Agitator Assembly - Panasonic MC-V325 Manuel D'utilisation

Card
Carte
Tarjeta
Washer
End Cap

Cleaning Agitator

Replacing Agitator

Agitator Assembly

Brush Unit
Belt Pulley
- 34 -
Clean agitator after every five uses
and every time the belt is replaced.
Remove lower plate.
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
Remove agitator.
Remove any string or debris located
on the end caps, washers or agitator
shaft.
Reinstall agitator and lower plate.
When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
Remove lower plate and agitator.
Position belt over belt pulley on the
new brush unit.
Reinstall agitator and lower plate.
Washer
End Cap