Turning Power On/Off; Turning On The Main Power - Sharp PN H801 Manuel D'installation

Caution
• Turn on the monitor first before turning on the PC or
playback device.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When turning the power off and back on, always wait for at
least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.

Turning Power On/Off

Turning power on/off
Press the POWER button or the POWER switch to turn the
power ON/OFF.
Green lit
Orange lit
Accessing the operation panel
nOperation mode
When the monitor is turned on for the first time after being
shipped from the factory, the operation mode setting screen
will be displayed. Set it to MODE1 or MODE2.
MODE1 ... OFF IF NO OPERATION is set to ON, and
MODE2 ... Will perform standard operation.
Even after being set, changes can be made using
OPERATION MODE, located in the menu of the monitor. (See
OPERATION MANUAL.)
Power switch
Status Status of the monitor
Power on
Power off (Standby mode)
POWER SAVE MODE is set to ON. (These settings
can not be changed.)
If there is no operation for 4 hours or more, the
monitor automatically enters standby mode. Power
consumption in standby mode is also minimized.
OFF IF NO OPERATION is set to OFF, and
POWER SAVE MODE is set to ON. These settings
can be changed.
Power LED
7
E