afx light LED COMET Manuel D'utilisation page 4

DMX512 [Address Settings]
This feature allows you to change the device address value.
Press the "MENU" key one or more times until d001 will be display, and then use "UP" or "DOMN" button to choose
the value of "001 ---- 512".
Press ENTER to validate the address.
d001-d512 : 8 channel mode
MASTER SLAVE OPERATING
Set the first CIRCUSof the link in auto or sound mode. This one is the master device.
Set the others CIRCUS of the link in DMX mode ( d001 ). These ones are slave devices.
The slave devices will do the same effect as master device.
MODE setting
DMX : Press the MENU button until d001 will be display then use UP and DOWN buttons to set the DMX
address.
SOUND : Press the MENU button until S1XX to S8XX will be display. CIRCUS will be operate with sound.
( XX are speed value ( 01 to 09 ))
8 sound modes : S1-- = sound program 1
For each sound mode, you can adjust speed from 1 to 9 ( using Up and Down buttons )
AUTO : Press the MENU button until
( XX are speed value ( 01 to 09 ))
8 auto modes : A1-- = auto program 1
© Copyright LOTRONIC 2014
S2-- = Sound program 2 ( no flash )
S3-- = Sound program 3 ( flash )
S4-- = Red led
S5-- = Green led
S6-- = Blue led
S7-- = White led
S8-- = Amber led
A1XX to A8XX
A2-- = Auto program 2 ( no flash )
A3-- = auto program 3 ( flash )
A4-- = Red led
A5-- = Green led
A6-- = Blue led
A7-- = White led
A8-- = Amber led
will be display. CIRCUS will be operate in automatic mode.
CIRCUS Page 4