Reference Measurement; Important Notices - LaserLiner DistanceMaster Pocket Mode D'emploi

Reference measurement:

Reference length
Set reference length
1a. Selection of
tens position
4. Rapid beeping: Measured value within reference value of ±1 mm.
Slow beeping: Reference value not yet reached.

Important notices

No objects may get into the laser's line of measurement.
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
be used in strong sunlight.
or falsified by rain, fog and snow.
Measure to flat surfaces.
measurement results.
housing.
16
GB
1b. Number
set-up
reference
stop
1x
2. Define reference
value
3. Now move the laser
90°
forward and back.
1x