Length Measurement; Area Measurement; Volume Measurement; Important Notices - LaserLiner LaserRange-Master i2 Mode D'emploi

Length measurement:

device on
1x

Area measurement:

area

Volume measurement:

volume
Min./max. measurement:
Min./max.
measurement
Min. measurement
The LC display shows the lowest value (min.) and the current value.
Max. measurement
The LC display shows the highest value (max.) and the current value.

Important notices

• The laser points to the location that will be measured.
No objects may get into the laser's line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3 mm.
10
EN
laser on
2x
1 sec
laser on 1. measure-
1x
1. measurement 2. measurement 3. measurement
1x 2x
laser on
1x
measure
3x
laser on
ment
2x 3x
3x 4x
measure
2x
2. measure-
ment
4x
5x 6x
stop
3x