Technical Data - aqua technix AQUA Splash II Traduction Du Mode D'emploi Original

8. Repairs
Repair are only to be done by an authorized service center.
9. Recommendations
Caution
Only install the pump in a lockable room, out of the reach of
children.
Ensure the motor's cooling. The installation site must be dry and
well ventilated.
Never obstruct the air supply to the fan by putting any objects on
the pump or too close to the pump.

9. Technical Data

Technical data at 50 Hz
Inlet Sa/outlet Da (nozzle)
Recommended inlet/outlet,
Power input P (kW)
1
Power output P (kW)
2
Rated current (A)
Weight (kg)
Type of motor enclosure
Thermal class
Motor speed approx. (rpm)
Max. continuous sound intensity
level dB (A)
Max. water temperature (°C) max.
Max. casing interior pressure (bar) 2,5
* Explanation of water temperature 40 (60) °C:
40 °C: max. water temperature as certified by the GS approval.
(60 °C): pump in its current design is however usable/designed for a max. water temperature of 60 °C.
Subject to technical modifications!
| 14
!
Aqua Splash II-3 OL
PVC pipe, d
1~ 230 V
1~ 230 V
1~ 230 V
For standard voltage according to DIN IEC 60038 and
IP X5
DIN EN 60034 (Euro-voltage).
F
Suitable for continuous operation at 1~ 220 - 240 V.
2840
Tolerances ±5 %.
70
1)
1)
40 (60)*
Aqua Splash II-4
Ø32 / Ø32
1¼ / 1¼
0.25
0.12
1.20
5.00
-
Measured with phonometer according to DIN 45635.
Aqua Splash II-6
Ø32 / Ø32 Ø38 / Ø38
1¼ / 1¼ 1½ / 1½
0.39
0.18
1.95
5.70

D42.02.317-P
D42.02.318-P
0.45
0.25
2.30
6.20
