Maintenance And Service Instructions; Repair Service; Warranty; Warranty Card - stayer VENTO 2400 B Instructions D'emploi

Switch off the tool and disconnect the plug
before investigating the problem
Tool does not operate
- No power supply. Check power supply (power cable,
circuit breakers, fuses)
- Plug not connected. Connect plug.
- Extension cord damaged. Replace extension cord.
- On/off switch defective. Contact dealer/service
station.
- Worn carbon brushes. Contact dealer/service station.
- Defective motor. Contact dealer/service station.
- Blowing/vacuum tube not completely mounted.
Mount two-part blowing/vacuum tube
Tool operates intermittently
- On/off switch defective. Contact dealer/service
station
- Internal wiring defective. Contact dealer/service
station
- Impeller blocked by foreign object. Remove
blockage
No/low blowing power
- Selector switch in vacuuming mode. Set selector
switch in blowing mode
No/low vacuuming power
- Selector switch in blowing mode. Set selector switch
in vacuuming mode.
- Collection bag is full/dirty. Empty/clean collection
bag.
- Vacuuming opening clogged up or blocked by
foreign object. Remove blockage

5. Maintenance and service instructions

• This tool is not intended for professional use.
• Always keep tool and cord clean (especially ventilation
slots 9)
- Clean the tool after each use with a soft brush or a cloth
(do not use cleaning agents or solvents)
- Remove the collection bag after each use, turn it inside
out and brush it thoroughly.
- After removing the collection bag, ensure that possible
dirt residues are removed from the released air outlet
area
Storage
- Store the tool indoors in a dry and locked-up place, out
of reach of children.
- Do not cover the tool with plastic (plastic may cause
moisture with rust/corrosion as a result)

5.1 Repair service

Our after-sales service responds to your questions
concerning maintenance and repair of your product as well
as spare parts. Exploded views and information on spare
parts can also be found under:
info@grupostayer.com
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
ENGLISH
16

5.2 Warranty

Warranty card

Included in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and return to vendor with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: If you cannot find the warranty card within the
documentation, you must ask for it through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired other than the manufacturer.

5.3 Disposal and recycling

The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be
collected separately and disposed of in an
environmentally correct manner.
Subject to change without notice.

6. Regulations

6.1 Technical Data

= Power input
= No load speed
rpm
= Maximum air speed
= Capacity sac receiver
= Airflow
= Airflow
= Weigth
kg
L = Sound power level
WA
L = Sound pressure level
A
P
= Vibration
The values given are valid for nominal voltages [U] 230/240 V ~
50/60 Hz - 110/120 V ~ 60Hz. For lower voltage and models for
specific countries, these values can vary. Please observe the
article number on the type plate of your machine. The trade
names of the individual machines may vary.
16