Maico aeronom WR 300 Instructions De Montage Et Mode D'emploi page 83

Connection option 2:
Ventilation unit with digital room air
control RLS D1 WR. Refer also to the
wiring diagram in the appendix.
A Ventilation unit WR 300 or WR 400
A2 Control circuit board: Jumper 8 bridged
= factory setting
B Room air control RLS D1 WR
W1 230 VAC connecting cable
W2 Screened control cable (to be supplied
by the customer) for RLS D1 WR
room air control. External diameter
3.2...6.5 mm, e.g. LIYCY 2 x 0.75 mm²
The ventilation unit is factory-set for
i
the connection of the room air control
RLS D1 WR. Jumper 8 is set on the
control circuit board A2.
81